|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit for clothes dryer installations. Includes white plastic 90 deg elbow with rubber gasket inside one side and 4 in metal worm gear clamp.
|
UL listed.
|
Aluminum film laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Easy to install, fits in tight places where rigid metal ducting will not work.
|
Silverduct? UL? 2158A clothes dryer transition duct provides flame resistance. It crushes easily behind the dryer and is held together with layers of aluminum foil and polyester plastic. Clothes dryer manufacturers may limit the use of plastics in venting. Check the dryer warranty and installation instructions as well as your local building codes for appropriate use.
|
Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Dryer manufacturers do not recommend venting containing any plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
Lambro Snap Lock Pipe, Aluminum, 4 in Dia, 60 in L
|
4 in aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
For dryer venting. 4 in aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24in L. Sturdy construction meets dryer manufacturer specifications.
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 24 to 41 in length.
|
Space saving aluminum dryer vent duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in from the wall for optimum space utilization. The 2-piece aluminum construction allows for these ducts extend from 18 to 30 in.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This all inclusive all metal dryer hook up kit is truly the ultimate installation kit for both the contractor and consumer. This kit includes a 4 in x 8 ft UL 2158A listed and marked semi-rigid aluminum duct, two attached all metal heavy-duty elbows and two 4 in metal galvanized worm gear clamps. The semi-rigid duct is UL 2158A labeled and approved for safe dryer venting. It is thicker than our standard non UL duct and like all aluminum ducts is totally non-combustible. New manufacturing technologies incorporated into this duct also allow for easy rotation, adding durability during installation. The two metal elbows are flame-resistant for a safe and long lasting connection and are designed to achieve tight 0 to 90 deg turns.
|
SAF-T-DUCT? Periscopes are 2 x 6 in rigid aluminum with 4 in draw-band collars and Snap-Lock? crimped fittings. These periscopes reduce the space needed behind the dryer from 6 in with pipe alone to 2 in without reducing airflow. We cover the widest range of lengths in the industry.
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used for venting most types of heating units. Features an easy to close snap lock system.
|
Lambro Dryer Vent Pipe, Aluminum
|
|
|
|
