Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES VALVE BOXES & COVERS MISC VALVES & FITTINGS
Sort By:
1 2 3 ... 15
Mueller ProLine In-Line Check Valve Mueller ProLine In-Line Check Valve Mueller ProLine Quarter Turn Ball Valve
Mueller Check Valve, In-Line, Series: ProLine, 1/2 in, SCH 40 Pressure Class, 200 psi, 73 deg F, Solvent End Connection, PVC Body, Stainless Steel Spring Trim, Neoprene O-Ring Seal Softgoods, White, ASTM D2466, Spring Loaded Poppet, For Both SCH 40 and 80 Pipe Mueller Check Valve, In-Line, Series: ProLine, 3/4 in, SCH 40 Pressure Class, 200 psi, 73 deg F, Solvent End Connection, PVC Body, Stainless Steel Spring Trim, Neoprene O-Ring Seal Softgoods, White, ASTM D2466, Spring Loaded Poppet, For Both SCH 40 and 80 Pipe For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle Mueller ProLine Quarter Turn Solvent Ball Valve Danco 80417 Round Broach Valve Wheel Handle
Plumb Pak Sillcock Faucet Handle, Suitable for: Square Stem For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. The Danco round broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use.
Danco 80416 Square Broach Valve Wheel Handle Mueller ProLine Quarter Turn Ball Valve Mueller 107-634 Quarter Turn Solvent Ball Valve
The Danco square broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday use. For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
B and K Industries 888-221RP Bleeder Caps Plumb Pak PP806-1 Sillcock Faucet Wheel Handle Plumb Pak PP806-11 Sillcock Faucet Handle
Fits most drainable valves. Three styles of caps with washers included. Plumb Pak Sillcock Faucet Handle, Wheel Handle, Suitable for: 1/4 in Square Stem 12 point.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine In-Line Check Valve Plumb Pak PP806-10 Sillcock Faucet Handle
Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Mueller Check Valve, In-Line, Series: ProLine, 1 in, SCH 40 Pressure Class, 200 psi, 73 deg F, Solvent End Connection, PVC Body, Stainless Steel Spring Trim, Neoprene O-Ring Seal Softgoods, White, ASTM D2466, Spring Loaded Poppet, For Both SCH 40 and 80 Pipe 16 point.
Plumb Pak PP10-8SN Coin Air Valve Mueller 107-604 Quarter Turn Solvent Ball Valve BREAKER VACUUM BRASS 3/4INCH
Plumb Pak Coin Air Valve, Metal, Satin Nickel, Dimensions: 2.94 in L x 2 in W x 2.06 in H Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant. The V-3 Vacuum Breaker prevents dangerous back-siphonage and backflow into a potable water supply. The V-3 is equipped with a protruding tip device for manual draining of a faucet (after hose removal), which prevents freezing. The V-3 is also available in a chrome-plated version (V-3C). These units are not intended for use where water contamination could occur as a result of draining or for permanent continuous pressure installation. For continuous pressure systems, install the BFP Dual Check Valve.
Plumb Pak PP20062LF 1/4 Turn Straight Shut-Off Valve Plumb Pak PP20050LF 1/4 Turn Angle Shut-Off Valve Mueller ProLine Quarter Turn Ball Valve
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 3/8 X 3/8 in Nominal, FIP X OD End, Brass Body, Chrome Plated Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
Plumb Pak PP20052LF Quarter Turn Straight Stop Valve Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP20051LF 1/4 Turn Angle Shut-Off Valve
Plumb Pak Straight Stop Valve, Quarter Turn, 3/8 X 3/8 in Nominal, FIP X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X OD End, Brass Body, Chrome Plated
Plumb Pak PP20060LF Quarter Turn Angle Stop Valve SC125B Sump Check Valve SC150B Sump Check Valve
Plumb Pak Angle Stop Valve, Quarter Turn, 1/2 X 3/8 in Nominal, Copper Sweat X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications Sump Check Valve, Series: SC, 1-1/4 in, MPT X Barb End Connection, Thermoplastic Body, Includes: Stainless Steel Clamp Sump Check Valve, Series: SC, 1-1/2 in, MPT X Barb End Connection, Thermoplastic Body, Includes: Stainless Steel Clamp
Mueller ProLine Quarter Turn Solvent Ball Valve Plumb Pak PP20053LF 1/4 Turn Straight Shut-Off Valve B and K 191-432HC Water Supply Line Valves
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X OD End, Brass Body, Chrome Plated B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, Sweat x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
   
 
1 2 3 ... 15