|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 3 in line level is simple, yet accurate. Its flat bottom allows for easy surface leveling. With special hooks for free sliding and high-visibility tinted liquid in vial for clear readings, this tool helps you read and mark angles with ease.
|
The ideal addition to every toolbox, this 3 in line level's lightweight design reduces line sag, for an accurate reading every time. It is also highly durable thanks to its impact-resistant Structo-Cast? construction and features unrestricted hooks that allow for easy movement.
|
Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel with depth gauge pocket clip. 32nds and 64ths on one side, decimal equivalents on reverse. 15/32 in wide.
|
This lightweight aluminum level has special hooks to hold line allowing the level to slide freely and a flat bottom for surface leveling.
|
Trim and lightweight metallic colored ABS case with durable key ring for convenience. Yellow, blade lacquer-coated for added rust protection, slide lock keeps blade extended as needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUFKIN L600N Series tape measures feature a bright orange textured case for easier grip and increased user comfort. The blade has a matte finish which reduces glare which increases blade legibility. The blade is also nylon coated for an extended product life. The dual riveted end hook tips allow the user to mark measurements without the need for a writing utensil.
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in Structo-Cast? torpedo level. This level is durable and convenient, with Johnson's unique high-impact and non-corrosive Structo-Cast? frame that was designed to withstand even the toughest jobsite abuse. It also features a top-read window for convenient, easy viewing, while the V-groove frame fits on pipe and conduit.
|
The #843/1 pencil compass and scriber is ideal for marking and scribing contours and circles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Fatmax? 6 ft keychain tape measure combines on-the-go convenience with the features that make STANLEY? tape measures the popular choice for professionals and homeowners. It features a 3 ft blade standout, a high-impact ABS case and 16 in and 19.2 in stud center markings. Lightweight and sturdy, this handy keychain tape measure delivers the measurement functions you need in a portable pocket size.
|
This convenient pocket level is always within reach for taking accurate measurements on the fly. It fits easily in your utility drawer, tool box or glove compartment and has a metal pocket clip so you can effortlessly keep it on you as you move about your jobsite. The acrylic vial and high-impact body are highly durable and the level features a V-groove edge that fits on pipe and conduit. The tip is also magnetic, making the level a handy pickup tool as well.
|
Johnson's 8 in T-bevel takes the guesswork out of angle duplication and eliminates the problems associated with analog readings and manual measurement transfer. It features a heavy-duty adjustable stainless steel blade that will never rust or corrode, as well as a durable Structo-Cast? high-impact handle with a hand grip. Its durable locking nut holds the blade securely in place to keep your work accurate when transferring angles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The high-visibility torpedo level is durable and accurate. Its top-read feature allows visibility from above for easy reading and marking. Constructed of ABS plastic for impact resistance and tinted 360 deg vials for visibility, this tool is built for accuracy, ease of use and durability.
|
The #803 stair gage set speeds and improves the quality of repetitive work, including making angle cuts on rafters and stair stringers.
|
Durable stainless steel blade with built-in blade lock for transferring angles. Tough 5-1/2 in, plastic handle provides handy and comfortable grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two is better than one! These 3 in line levels lightweight design reduces line sag, for an accurate reading every time. They are also highly durable thanks to their impact-resistant Structo-Cast? construction and feature unrestricted hooks that allow for easy movement. The impact-resistant Multi-Pitch? vial also read slope in 1/8 in increments.
|
As a saw guide, stair layout tool or rafter tool, Johnson's 7 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ideal addition to every toolbox, this 3 in line level's durable, lightweight aluminum construction reduces line sag, for an accurate reading every time. It features unrestricted hooks that allow for easy movement.
|
Find plumb, level and 45 deg quickly and easily with Johnson's 9 in Structo-Cast? torpedo level. This level is durable and convenient, with Johnson's unique high-impact and non-corrosive Structo-Cast? frame that was designed to withstand even the toughest jobsite abuse. It also features a top-read window for convenient, easy viewing. Its rubber, magnetic edge also allows for convenient hands-free use on ferrous metal surfaces, while the V-groove frame fits on pipe and conduit.
|
Crafted from sturdy extruded aluminum, this yardstick features screened, thermal-bonded black graduations in 1/8 in and 1/16 in that are easy to read. And the yardstick's clear, protective anodized finish protects it from wear and tear, extending the life of the tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 8 in Speedlite? square is formed from lightweight, high-impact structural composite and is available in matte gray, high-visibility yellow and high-visibility orange. It's basically the same as the one and only Speed? square but is also great for use with siding and other delicate materials, since it won't mar soft finishes. Plus, its 8 in size means it's ideal for marking cuts in 8 in siding. Look for the Diamond?.
|
Works as a rafter square, try square, protract or a power saw guide. Lightweight compact heavy-duty ABS plastic body fits conveniently into pocket or tool belt. Detailed instruction book included.
|
Make your next stair or rafter work fast, easy and accurate with Johnson's gauge set. These flush-mounted, brass-plated thumbscrews are durable and ideal for repeat angle cuts when laying out stairs and rafters. They attach to all standard framing and carpenter squares.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Stanley 12-by-1/2 in tape measure features a polymer-coated blade for long life, a durable textured case for a non-slip grip and high-contrast colors for easy readability, with numerical readouts every 1/8 in. It measures 12 ft in L by 1/2 in W and stands out 7 ft.
|
The #29 plastic protractor facilitates measurement and marking of inside, outside and sloped angles. It is ideal for construction jobs, cabinet-making and fine carpentry, where a standard protractor or T-bevel won't fit.
|
The essential marking and checking tool for any woodworker, this 8 in try and miter square makes assessing angles and marking straight cuts easy and accurate. Its Structo-Cast? handle is both durable and lightweight, while its heavy-duty blade is made of stainless steel so you'll never need to worry about rust or corrosion. This square features graduations in 1/8 in increments that are permanently etched in black for easy visibility.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Johnson's 8 x 12 in carpenter square features EZ Read? thermal bonded numbers and 1/8 in graduations for easy visibility. And its rugged steel construction makes the square durable enough to withstand even the worst jobsite abuse.
|
The #230 economy straight leaf feeler gage is ideal for adjusting and gaging spark plugs, distributor points and valve clearances, as well as measuring spaces between parts.
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
|
|
