|
|
|
|
|
|
|
|
|
|
|
|
|
|
Keyless Plastic ceiling lamp holders are molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4 in (101.6 mm) outlet boxes with breakout for 3-1/4 in (82.5 5 mm) box mounting. Leads are 6 in (152.4 mm) 105 deg C insulated stranded #16, stripped 3/4 in (19.05 mm). Pull chain devices include ball chain, 3 ft (0.91 m) of cord, connector and endbell. Top wire versions have terminal screws backed out - ready for wiring - without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units.
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable spike lights. 75-150 watt par 38 lamps, CFL compatible. For general outdoor lighting in wet, damp or dry locations. Rugged die cast construction. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Locking swivel knuckle assures positive lamp positioning and provides pin-point directional aiming. 6 foot cord.
|
Porcelain, mounts on 4 in outlet box with breakout for 3-1/4 in box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL listed, meets CSA requirements, NOM certified. 250 V, 660 W.
|
Eaton Lamp Holder, Base Type: Medium, 250 V, 15 A, Wattage Rating: 660 W, Wire Size: 14 to 16 AWG, Housing Material: Thermoset, White, Wiring Type: Push, Top, Dimensions: 2.466 in L x 4.503 in W x 4.503 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 listed, NOM certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed.
|
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
|
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed.
|
High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included. Polybagged. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two stage dimmer, 20 Lumens. Uses 4 AA batteries (not included). Secure keyhole mount and drywall anchor included.
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Clear floral glass shade. 5-3/8" diameter x 7" height. Uses one clear medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a Boston Harbor mount for Post Lantern. It has a textured black finish with fluted accents on cast aluminum making it a handsome and durable compliment to any exterior lantern post.
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
Just press the easy to reach button switch and the light comes on. The Push N Light contains 6 super bright 5 mm LEDs, durable plastic construction design and an easy to use push-button switch. Ideal for indoor or outdoor lighting, the push light is perfect for closets, cupboards, nightstands, staircases, yard buildings, attics, RVs, tents and countless other places. The 4AA - 6 LED Push N Light comes complete with 4 AA cell batteries and Velcro for easy attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The twist lock light control is ideal for road, parking lot and driveway lighting with NEMA 3-prong locking type receptacles. It gives an added measure of security by automatically turning on your light at dusk and off at dawn. The time delay feature eliminates flickering and the encapsulated photocell can withstand temperatures of -50 to 150 deg F.
|
This heavy-duty outdoor post eye light control allows you to turn your security lighting or task lighting on and off automatically each night. It is compatible with incandescent, LED, fluorescent, mercury vapor and sodium bulbs and will mount into any 3/4 in Dia lamp post.
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
