DUCT WORK

Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK

Choose a sub category:

DUCT PIPE

DUCT ACCESSORIES

REGISTER BOOTS / STACKS

Sort By:

1 2 3


Imperial GV0752 Round Damper with Key, 6 in Dia, Steel Our Price: $7.18	Imperial GV0957-B Duct Take-Off, 4 in Duct, 30 ga Gauge, Steel Our Price: $8.16	Lambro 143W Under Eave Vent, 5-3/4 in W Hood, 2-1/4 in H Hood, 4 in Duct, Plastic Hood Our Price: $10.09

Use to adjust and balance airflow in individual runs of round pipe.	Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.	Under eave vent for bathroom fan and dryer venting.


Imperial GV0969-A Duct Take-Off, 5 in Duct, 30 Gauge, Steel Our Price: $11.60	Imperial GV0704-C Universal Boot, 4 in L, 10 in W, 6 in H, 30 Gauge, Steel, Galvanized Our Price: $12.05	Imperial GV0682 Universal Boot, 3 in L, 10 in W, 4 in H, Steel, Galvanized Our Price: $12.51

Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.


Imperial GV0692-A Universal Boot, 3-1/4 in L, 10 in W, 5 in H, Steel, Galvanized Our Price: $12.62	Imperial GV0683-A Universal Boot, 3-1/4 in L, 10 in W, 4 in H, Steel, Galvanized Our Price: $12.62	Imperial GV0694-A Universal Boot, 4 in L, 10 in W, 5 in H, Steel, Galvanized Our Price: $12.64

Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.


Imperial GV0657 End Boot, 3-1/4 in L, 10 in W, 5 in H, 90 deg Angle, Steel, Galvanized Our Price: $12.76	Imperial GV0705-C Wall Register Boot, 4 in L, 12 in W, 6 in H, Galvanized Our Price: $13.04	Imperial GV0650 End Boot, 3-1/4 in L, 10 in W, 4 in H, 90 deg Angle, Steel, Galvanized Our Price: $14.18

Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.


Imperial GV0808-A Short Duct Reducer, 6 in L, 30 Gauge, Galvanized Steel Our Price: $14.22	Imperial GV0667 Wall Register Boot, 4 in L, 10 in W, 6 in H, Galvanized Our Price: $14.49	Imperial GV0810-A Short Duct Reducer, 30 ga Gauge, Galvanized Steel Our Price: $14.53

Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.	Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.	Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.


Imperial GV0604 Angle Boot, 3 in L, 10 in W, 4 in H, 90 deg Angle, Steel, Galvanized Our Price: $14.64	Imperial GV0605 Angle Boot, 3-1/4 in L, 10 in W, 4 in H, 90 deg Angle, Steel, Galvanized Our Price: $14.64	Imperial GV0658 End Boot, 4 in L, 10 in W, 5 in H, 90 deg Angle, Steel, Galvanized Our Price: $14.67

Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.	Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.	Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.


Imperial GV0651 End Boot, 4 in L, 10 in W, 4 in H, 90 deg Angle, Steel, Galvanized Our Price: $14.69	Imperial GV0685-B Universal Boot, 4 in L, 10 in W, 4 in H, Steel, Galvanized Our Price: $15.09	Imperial GV0614 Angle Boot, 4 in L, 10 in W, 5 in H, Steel, Galvanized Our Price: $15.22

Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.


Imperial GV0664 End Boot, 3 in L, 10 in W, 6 in H, 30 Gauge, Galvanized Our Price: $15.36	Imperial GV0612 Angle Boot, 3 in L, 10 in W, 5 in H, 90 deg Angle, Steel, Galvanized Our Price: $15.42	Imperial GV0606 Angle Boot, 4 in L, 10 in W, 4 in H, 90 deg Angle, Steel, Galvanized Our Price: $15.42

Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.	Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.	Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.


Imperial GV0613 Angle Boot, 3-1/4 in L, 10 in W, 5 in H, 90 deg Angle, Steel, Galvanized Our Price: $15.42	Imperial GV0701 Universal Boot, 3 in L, 10 in W, 6 in H, Steel, Galvanized Our Price: $15.49	Imperial GV0702 Universal Boot, 3-1/4 in L, 10 in W, 6 in H, Galvanized Our Price: $15.60

Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.


Imperial GV2450 Wall Register Boot, 3 in L, 10 in W, Galvanized Our Price: $16.40	Imperial GV0699-C Wall Register Boot, 2-1/4 in L, 12 in W, 6 in H, Galvanized Our Price: $16.47	Imperial GV0811 Short Duct Reducer, 30 ga Gauge, Galvanized Steel Our Price: $16.67

Imperial Wall Register Boot, Galvanized, 3 in L, 10 in W	Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.	Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.


	1 2 3