|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well each sold separately.
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well each sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb reducing elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The reducing elbow allows you to reduce pipe size with a single fitting. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb sweat female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a female sweat connection that can be soldered.
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite? PEX barb fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well (each sold separately).
|
The SharkBite? PEX barb polybutylene adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect PEX tubing to polybutylene pipe. SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. This product includes two-colors co-ordinated crimp rings the included black crimp ring is intended for PEX while the copper colored crimp ring is for use on polybutylene pipe.
|
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.
|
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.
|
The SharkBite? PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb tee is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
|
Apollo Hose Pipe Adapter, Nominal Size: 1/2 x 3/4 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.
|
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.
|
SharkBite? PEX barb reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo ApolloPEX? Pipe Plug, Nominal Size: 1/2 in, Barb Connection, 200 psi, Operating Temperature: 200 deg F, Poly Alloy, 7/8 in L, Suitable for: ApolloPEX? Crimp Rings, Stainless Steel Pinch Clamps and Stainless Steel Sleeves
|
The SharkBite? PEX barb bullnose tee is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. This fitting has a larger diameter connection coming out of the middle of the tee while the two sides are smaller in Dia. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
ApolloPEX? poly alloy couplings are the most economical fitting available for the joining of PEX pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX lead-free dezincification-resistant brass male elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
Apollo ApolloPEX? Pipe Plug, Nominal Size: 3/4 in, Barb Connection, 200 psi, Operating Temperature: 200 deg F, Poly Alloy, 7/8 in L, Suitable for: ApolloPEX? Crimp Rings, Stainless Steel Pinch Clamps and Stainless Steel Sleeves
|
Apollo PEX lead-free dezincification-resistant brass male elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
ApolloPEX? poly alloy elbows are the most economical fitting available for the joining of PEX pipe.
|
Apollo Hose Pipe Adapter, Nominal Size: 1 x 3/4 in, Barb x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
ApolloPEX? poly alloy couplings are the most economical fitting available for the joining of PEX pipe.
|
|