|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
|
Green round washer head screw for switch and outlet boxes.
|
GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects grounding wire to the grounding rod.
|
Convenient grounding accessories include products suitable for most job requirements.
|
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects grounding wire to the grounding rod.
|
Connects grounding wire to the grounding rod.
|
Southwire Ground Clip, Wire Size: 14 to 10 AWG, Steel, Green, Dimensions: 0.1 in H x 2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Schneider Ground Bar Kit, 7 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
Schneider Ground Bar Kit, 9 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schneider Ground Bar Kit, 12 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Cutler Hammer Ground Bar Kit, 10 Terminals, 4.26 in Length, Used with BR and CH Series Loadcenters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Siemens Ground Bar Kit, 15 Terminals, Copper/Aluminum, 14 - 4 AWG Conductor, 12-1/4 in Length, 4-3/4 in Width, 1-1/2 in Height, 60/75 deg C, For ES and PL Load Centers
|
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schneider Ground Bar Kit, 15 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
Schneider Ground Bar Kit, 18 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
Cutler Hammer Ground Bar Kit, 14 Terminals, UL Listed
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Schneider Ground Bar Kit, 23 Terminals, Aluminum/Copper, 14 - 4 AWG, 12 - 4 AWG, 14 - 12 AWG, 12 - 10 AWG Conductor, 30 - 400 A, Aluminum, ANSI Specified, UL Listed, Used in Load Centers, CSED Devices and NQOD and NF Panel Boards
|
Siemens Ground Bar Kit, 10 Terminals, Aluminum/Copper, 14 - 4 AWG Conductor, 60/75 deg C, For Equipment Grounding Provision
|
Siemens Ground Bar Kit, 30 Terminals, Copper/Aluminum, 14 - 4 AWG Conductor, 15-3/4 in Length, 4-3/4 in Width, 1-1/4 in Height, 60/75 deg C, For ES and PL Load Centers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
|
|
