|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs.
|
Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
|
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved.
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL listed.
|
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
|
Die cast of high strength corrosion-resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. UL approved.
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402 fits cable range of 12/4, 10/2, 10/3, 2/1. No 75403 fits cable range of 10/4, 8/2, 8/3, 1/1. No 75404 fits cable range of 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
|
Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed.
|
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL listed.
|
High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved.
|
Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL approved.
|
Halex Clamp Connector, 1 in Trade, Zinc, 1-29/32 in Length, 1-1/8 in Width, 1-11/16 in Height, Suitable for: #14/2 to #6/3 AWG or #3/10/3 AWG Non-Metallic Cable or 0.45 to 0.73 in Dia Flex Cord
|
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402 fits cable range of 12/4, 10/2, 10/3, 2/1. No 75403 fits cable range of 10/4, 8/2, 8/3, 1/1. No 75404 fits cable range of 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
|
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
